EchoLink

ECHOLINK 
NODENAME NODEID REPEATER
KI4UWC-R 465626 146.925 -600 PL156.7
BASIC ECHOLINK INSTRUCTIONS
To Connect To A Node Via Radio To Disconnect From Node Via Radio
  1. Hold Down PTT
  2. Key in node number or shortcut
  3. Release PTT
  1. Hold Down PTT
  2. Press # for current connection or Press ## for all connections.
  3. Release PTT
The connection / disconnect will take about 5 seconds and give you a message when completed.

!!  IMPORTANT !!

Please wait 1 second after your press PTT  before you start speaking
or the first  part of your conversation will not be heard.
SHORTCUT COMMANDS
LOCATION NODE SHORTCUT
K4SIX – Orange Park, Florida 6 Meter 53190 50
Orange Park Club 440 ( 444.500) 80108 51
CROWN DISTRICT SHORTCUTS
LOCATION NODE SHORTCUT
DUVAL EOC ( WJ4EOC Crown District ) WJ4EOC CD0
FL EOC KA4EOC CD1
    CD2
CLAY – 146.925 KI4UWC-R CD3
DUVAL – 147.390 K2LSF-R CD4
NASSAU – 146.835 W4NAS-R CD5
PUTNAM – 145.370 W4SA-R CD6
ST JOHNS – 146.625 KF4MX-R CD7
FLAGLER – 145.470 (East Coast District) KG4IDD-R CD8
RED CROSS HQ WA4RC CD9
COMMAND DESCRIPTION KEYS
Connect EnterNode#
ConnectByCall C
Disconnect #
Disconnect ALL ##
Reconnect 09
Status 08
Play Information *
Query By Call 07
Query By Node 06
Random Conference 02
Random Link 01
Random Node 00
Random User 03

http://www.echolink.org

Firewall Configuration Support can be found at http://www.echolink.org/firewall_solutions.htm

Basic Information

EchoLink requires that your router or firewall allow inbound and outbound UDP to ports 5198 and 5199, and outbound TCP to port 5200.  If you are using a home-network router, you will also need to configure the router to “forward” UDP ports 5198 and 5199 to the PC on which EchoLink is running.

This can be summarized as:
Allow UDP destination ports 5198-5199 between Internet and PC in both directions
Allow TCP (source port any, destination port 5200) from PC to Internet

The information above applies to every situation, regardless of the type of equipment and software you are using.  If the information below does not help you solve the problem, please consult your equipment’s documentation, or contact the manufacturer for support, and provide them with the information above.
Note: If you are using Internet security software and have recently upgraded to a newer version of EchoLink, you may need to re-apply the special security settings you had established earlier.

 

Comments are closed.